Productinformatie
Omschrijving
Always wanted to build your own camper van but don't know where to start when it comes to the electrical system? We have put together 3 packages with the most commonly used components — ensuring a suitable solution for every self-built camper.
-
Compatibility All our components are matched to each other — no risk of errors or damaged components.
-
Free Time Save time that you can spend building your camper — or enjoying it on the road.
-
Warranty Complete package from one supplier: clear overview, warranty on all components, and quick assistance if needed.
-
Wiring Diagram Each package comes with a clear and pre-tested diagram — so you can connect with confidence.
Why ECE-R10 is important for your self-built camper van
Since the enforcement of electrical conversions has been tightened, every electrical and electronic component permanently installed in your camper van must comply with the ECE-R10 standard. This standard concerns EMC: electromagnetic compatibility. Every active electronic device emits electromagnetic signals to a greater or lesser extent — and can therefore cause interference with other systems in your vehicle, such as engine management, ABS, or the on-board computer. At the same time, that same device must also be resistant to external interference without failing or malfunctioning. R10 therefore tests two aspects: causing interference and being interfered with.
Not every component requires a certificate for this. The standard applies to active components — devices with their own electronics that convert, switch, or regulate voltage, such as an inverter, battery charger, DC/DC converter, or charge controller. Passive components without active electronics — such as cables, fuses, power distributors, switches, or a simple 12V connection without a built-in charger — fall outside the R10 scope, as they do not generate or process signals themselves.
That is why we consciously choose certified components where necessary: the Multiplus, the battery, the DC/DC converter, and the MPPT charge controller in this package are all ECE-R10 certified. This way, you can build with peace of mind, without unpleasant surprises during inspection.
- Consumer unit with RCD (230V)
- Fuse distribution box (12V)
- Fuse 80A
- 100Ah AGM battery (ECE-R10)
- DC/DC converter 18A – charging while driving (ECE-R10)
- 12V connections (3x)
- Multiplus 12/500 (battery charger, inverter, transfer switch) (ECE-R10)
- 120W monocrystalline solar panel set
- 230V single socket (3x)
- 3-pole switch (Multiplus control)
- Camper van external connection
- 3×1.5mm² (30m) · 2×2.5mm² (15m)
- Multiplus cable set
- Consumer unit with RCD (230V)
- Fuse distribution box (12V)
- Fuse 150A
- 100Ah LiFePO4 lithium battery with built-in monitoring system (ECE-R10)
- DC/DC converter 18A – charging while driving (ECE-R10)
- 12V connections (3x)
- Multiplus 12/800 (battery charger, inverter, transfer switch) (ECE-R10)
- 185W monocrystalline solar panel set
- 230V single socket (3x)
- 3-pole switch (Multiplus control)
- Camper van external connection
- 3×1.5mm² (30m) · 2×2.5mm² (15m)
- Multiplus cable set
- Consumer unit with RCD (230V)
- Fuse distribution box (12V)
- Fuse 300A
- 100Ah LiFePO4 lithium battery (2x) with built-in monitoring system (ECE-R10)
- DC/DC converter 30A – charging while driving (ECE-R10)
- 12V connections (3x)
- Multiplus 12/2000 (battery charger, inverter, transfer switch) (ECE-R10)
- 240W monocrystalline solar panel set (2 panels)
- 230V single socket (3x)
- Digital control panel (Multiplus control)
- Camper van external connection
- 3×1.5mm² (30m) · 2×2.5mm² (15m)
- Multiplus cable set