Productinformatie
Omschrijving
This pure sine wave DC/AC inverter converts 12 VDC to 230 VAC, for devices with a continuous power of 1600W (peak power 3200W). The inverter features integrated Bluetooth and a VE.Direct communication port.
Download the VictronConnect app
Download for Android from Play Store
Download for iOS from App Store
Download for Mac from App Store
This new Victron Phoenix inverter model 12/2000 230V Smart provides household appliances with 230V AC with the correct supply voltage from DC batteries. This pure sine wave DC/AC inverter converts 12 VDC to 230 VAC, for devices with continuous power with non-linear loads of 2000VA (1600W with peak power of 3200W). The inverter features integrated Bluetooth and a VE.Direct communication port. Thanks to Bluetooth, the inverter can be controlled with a smartphone, tablet, or PC via the Victron Connect App for information and settings!
Integrated Bluetooth: fully configurable with a tablet or smartphone
- Low battery voltage alarm
- Low battery voltage shutdown and restart levels
- Dynamic cut-off: load-dependent cut-off level
- Output voltage: 210 - 245V
- Frequency: 50Hz or 60Hz
- ECO mode on/off and ECO mode sensitivity level
- Alarm relay
Monitoring
- Input and output voltage, load, and alarms
VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable required) to configure and monitor the same parameters.
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit proof and protected against overheating, either due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps, or power tools.
ECO mode
In ECO mode, the inverter switches to standby when the load drops below a preset value. Once in standby, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds a preset level, the inverter remains on.
Remote on/off
An external on/off switch can be connected to a two-pole connector. Alternatively, the H terminal (left) of the two-pole connector can be switched to battery plus, or the L terminal (right) of the two-pole connector can be switched to battery minus (or for example, the chassis of a vehicle).
LED diagnostics
Refer to the manual for a description.
